KIWITECH Temporary Electric Fencing Systems
Increase the productivity of grass farming. Designed by farmers for farmers.
Cost-effective, extremely tough, quick and simple to install.
Find out more below
The Kiwitech electric fencing range is the creation of Harry Wier, founder and Kiwi farmer, who has been researching and practising rotational grazing for a lifetime.
Kiwitech’s Design Specification
Fast.
Using the Kiwitech System enables you to put up and take down a fence in a single pass, either on foot (using the Carried PAC) or from the seat of your quad (Vehicle PAC).Scalable.
No need to buy more geared reels, One PAC can erect and remove as many fences as you need, just chose the length of spool you require and then add posts!Light to carry.
Loaded with a 300m fence kit a: 1-Wire PAC (20 posts ) weighs 10kg & 3-Wire PAC (30 posts) weighs 17kg!
Tough.
Fibreglass posts bend and spring back un-harmed, polywire has high breaking load, spools flex under impact, this gear copes with life on the farm!
NZ Made
All Kiwitech products are made in New Zealand from premium materials. Their industrial strength system saves time and frustration.
Simple to maintain.
There’s no chance of shorting out with Kiwitech’s fibreglass posts and spools which can be held off the ground in a multitude of ways. All PAC and Tread-in parts are replaceable.
Introducing the Kiwitech PAC Temporary Fence System
The lightweight Carried PAC tucks under your arm, allowing you to carry up to 30 posts & 400m spools.
Carried and Vehicle PACs available in 1, 2 & 3 Wire Fence Options:
One, Two and Three wire temporary electric fencing the fun and fast way.
A Kiwitech PAC (which consists of a 4:1 Geared Winder and Tread-in stowage Rack) is all you need to put up and take down (in just one pass) as many fences as there are Tread-ins and Spools for.Great for Ewe & Lambs and suckler cattle, dairy cow graziers who are regularly shifting fences, you won't find a quicker method!All Kiwitech PACs are modular. Parts are easily replaced after long use and upgrades from Carried to Vehicle PACs or 1 Wire to multi-wire PACs is possible with minimum extra investment.
The Vehicle PAC mounts on to the front rack of a quad bike using a clamp.
In Fence erection mode the PAC dispenses the wires allowing the user to clip on the tread-in posts at the desired spacings as they travel across the field. For fence removal the PAC has a 4:1 ratio gearbox allowing wires to be quickly wound up before the user travels across the field to collect the posts and store them in the rack.
Kiwitech Tread-ins. 1, 2, 3 wire.
Complete your fence with…
Kiwitech Polywire and Spools.
Kiwitech polywire has 6 strands of white mono filament and 6 strands of 0.2mm stainless for great resistance to burnout. It also has a tight uniform twist for longevity (will not unravel) and is made specifically to withstand frequent reeling in and out.
Kiwitech End Assemblies and Release Hook
End Assemblies are an optional strong anchoring point for fence ends or brace for Release Hook use. The Release Hook is what enables one pass only temporary fencing. Correctly wired up it will let go of polywire after a series of big deliberate pulls from up to 400m away.
The Kiwitech Tread-ins consists of a 9 mm Fibreglass post, Nylon insulator wedge clip and Short Pedal. Shop fence kits below.
Single Wedge Clips - Nylon Insulator.
Extremely tough, UV protected, these insulators stand up under intense use of constant un-clipping wire, pinning down, reeling in wire. Made from glass reinforced nylon. Add multi clips to the post to create multi wire fences.
Fibreglass Posts.
Kiwitech Plain Fibreglass Posts contribute to making a super tough, ultra-resilient electric fence line. No shorting out, rot or rust, quick and simple to install and easy to remove and re-use. The 9mm post is the Core component of the Kiwitech temporary fencing Tread-in.
Short Pedals.
120mm pedal with a 7mm harden steel pin pierce into the ground. They can be adjusted to best height and secured in place with 9mm wedge onto the fibreglass post.
