Kiwitech 1 wire temporary electric fence with a herd of cattle in a grass field.

A Kiwitech Vehicle PAC on a red quad bike in a grass field.

A Kiwitech fibreglass end assembly, connected to a temporary electric fence in a grass field.

Insulated zammr gate handle and a Kiwitech poliwire spool with release hook connected to high tensile wire fence in a grass field.

1 Wire - 300m Complete Fence Kit

from £150.19

This kit contains all the posts, spools, starting/ending options that you need to build a Kiwitech Temporary electric fence, up to 300m long. We recommend 1 wire for dairy and beef cattle.

Scroll down for full details on the equipment included and the optional add on’s to complete your kit.

How to start and end your fence:

Kiwitech End Assembly (x2) Release Hook (x1) Zammr Handle (x1)

Add a Kiwitech PAC or Winder:

Not Needed Carried PAC Vehicle PAC 1 Wire Winder

Quantity:

Add To Cart

This kit contains all the posts, spools, starting/ending options that you need to build a Kiwitech Temporary electric fence, up to 300m long. We recommend 1 wire for dairy and beef cattle.

Scroll down for full details on the equipment included and the optional add on’s to complete your kit.

This kit contains all the posts, spools, starting/ending options that you need to build a Kiwitech Temporary electric fence, up to 300m long. We recommend 1 wire for dairy and beef cattle.

Scroll down for full details on the equipment included and the optional add on’s to complete your kit.

Product Details

Everything you need to make a free-standing 1 Wire 300m fence, perfect for field division and grazing management systems.

The kit contains:

1 x 300m Spool wound with Kiwitech 6 Strand Polywire,
18 x 1 Wire Kiwitech Tread-in Posts (16.5m Spacing)
note: assembly required, all instructions found here: Equipment Instructions

Then choose how to start and end your fence:

Option 1: Kiwitech End Assembly
- The ultimate way to start and end your Kiwitech fence. Free standing post assembly capable of supporting up to 400m fence, spool is tensioned directly onto the posts, the post and release hook set up at both ends enables the Kwiitech ‘one pass only’ temporary fencing. Correctly wired up it will let go of polywire after a series of big deliberate pulls from up to 400m away

Start with a Zammr Handle End with a Kiwitech Release Hook.png

Option 2 - Kiwitech Release Hook to connect spool and a Zammr Handle to start fence.
- Suitable if you have strong boundary / sub division fences to connect your temporary fence

Kiwitech fences are very tough the fibreglass posts bend, not break! Proven and made in NZ the posts have a special UV resistant coating giving a 30-year desired service life.

Add a Kiwitech PAC - all you need to put up and take down (in just one pass) as many fences as there are Tread-ins and Spools for

The Kiwitech Carried and Vehicle PAC makes electric fencing an easy and efficient task. This clever device that lets you erect or remove a 1-wire fence in one pass.

Kiwitech 1 spool winder: Slot any Kiwitech spool onto this winder to easily reel in the wire on your fence with the 4:1 Gearbox, perfect for smaller set ups when a PAC isn’t needed.

Is your fence creating a corner more than 45degrees?

If so add in a corner post to increase the strength and stability, these assemblies use long ground pedals and a post and strut combination.